Top Flite 6′ MonoKote (Metallic Plum)

This is a Top Flite 6′ Roll of Metallic Plum MonoKote. MonoKote is a thin, clear, protective film with a pigmented, heat-activated adhesive on the back specially formulated for model airplanes. MonoKote is applied with a sealing iron. Heat from the iron shrinks the film while simultaneously activating the adhesive tightly bonding it to your model. When MonoKote is not heated, the adhesive is not sticky. The adhesive side has a clear, protective backing that must be removed before application.

• Can be applied quickly and easily using a heat gun or sealing iron for professional-quality results.
• Extra pliable — conforms readily to compound curves for a wrinkle-free finish.
• Puncture-resistant and easy to repair. Small “dents” disappear just by reheating!
• Allows easy cleanup of smudges or exhaust residue using detergent and water or Top Flite MonoKote Cleaner Polish

Attaching to Wood: 215-240° F (102-116° C)

Partial Shrinkage: 230-270° F (110-132° C)

Maximum Shrinkage: 270-350° F (132-177° C)

Note: MonoKote is best-suited for medium-size models in the 2 lb. (1000g) range and up. Smaller/lighter models may be more suitable for MonoKote’s lighter, low-heat/low-shrink cousin EconoKote (though EconoKote may be used on larger models, too).